Ford Skorpio +1.1. Identification of the car +2. Maintenance +3. Motors +4. System cooling +5. Fuel system +6. Union +7. Transmissions +8. Driving axle and rear bridge +9. Direction + 10. Supports of the triangular form of interruption - 11. Brakes system 11.1. Technical characteristic -11.2. Dispatch brakes 11.2.1. Substitution of shoes of brake 11.2.2. Substitution of a support 11.2.3. Substitution of a disc of brake +11.3. Subsequent brakes 11.4. Agreement of the brake of emergence 11.5. Removal of air of the system of brakes +11.6. System antiblockade +12. Wheels and tires +13. Body +14. Electric equipment
|
Prevention
The discs so much of advanced brakes will have the identic thickness as of a condition of a surface, only then both wheels will be curbed at the same time. Therefore, it is recommended to substitute at the same time both discs.
Removal
ORDER OF REALIZATION |
1. To withdraw shoes of brake (11.2.1 to see the subsection). |
2. To lift a support to a body through a wire to protect a hose of brake of the damage. |
3. There unscrews the bearer of a support of a rotary fist of a wheel. |
4. To unscrew the screw of the fixation of a disc of brake of a nave of a wheel and to withdraw a disc of brake. |
|
Installation
ORDER OF REALIZATION |
|
1. To establish a disc of brake and to crush the screw of his fixation to a nave of wheel (the arrow specified a ring of spring agreement of the fixation of a disc of brake). |
2. To screw the bearer of a support in a rotary fist of a wheel. |
3. To establish shoes of brake and a support (11.2.1 to see the subsection). |
4. To establish wheels, to lower the car and to hold tight nuts of the fixation of wheels. |
5. It is several times strong to hold tight a pedal of brake to bring shoes of brake in the contact with a brake disc. |
|
|
|