FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+ 7. Transmissions
- 8. Driving axle and rear bridge
   8.1. Technical characteristic
   +8.2. Driving axle
   -8.3. Zadny Bridge
      8.3.1. Removal and installation of the rear bridge
      8.3.2. To be demolished and meeting of the rear bridge
      8.3.3. Differential Desmontagem
      8.3.4. Differential meeting
      8.3.5. Agreement of loads of wheels of gear of the main transfer
      8.3.6. Agreement of wheels of gear of the main transfer
      8.3.7. Meeting and agreement of the main transfer
      8.3.8. Substitution of a ring of fighter of a wheel of gear of the main transfer
   +8.4. Power ends
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

8.3.8. Substitution of a ring of fighter of a wheel of gear of the main transfer

GENERAL INFORMATION

The substitution of a ring of fighter of a wheel of gear of the main transfer is done without the removal of the rear bridge.

ORDER OF REALIZATION

1. To lift the car.
2. Desconectar the driving axle of a flange of a wheel of gear of the main transfer and to lift an end to a body.
	3. Through the adaptation 15.030 to unscrew nuts of the fixation of a flange of a wheel of gear of the main transfer.
	4. Correspondent withdraws a flange of a wheel of gear of the main transfer through the artist of streaptise.
5. 15.072 takes a ring of fighter of a wheel of gear through the adaptation.
6. To establish a new hunting they touch through the adaptation 15.047 one (not to rub the manufacturing lubricant of an edge of fighter of a ring).
7. To establish a flange in a wheel of gear of the main transfer, to put a nut of the fixation of a flange and to hold tight it through the adaptation 15.030.
8. To annex the driving axle to a flange of a wheel of gear of the main transfer.