FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+ 7. Transmissions
- 8. Driving axle and rear bridge
   8.1. Technical characteristic
   +8.2. Driving axle
   -8.3. Zadny Bridge
      8.3.1. Removal and installation of the rear bridge
      8.3.2. To be demolished and meeting of the rear bridge
      8.3.3. Differential Desmontagem
      8.3.4. Differential meeting
      8.3.5. Agreement of loads of wheels of gear of the main transfer
      8.3.6. Agreement of wheels of gear of the main transfer
      8.3.7. Meeting and agreement of the main transfer
      8.3.8. Substitution of a ring of fighter of a wheel of gear of the main transfer
   +8.4. Power ends
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

8.3.2. To be demolished and meeting of the rear bridge

GENERAL INFORMATION

The wheel of main gear of the main transfer together with conical loads and the deformed remote capture

1 - extern conical load,

2 - the deformed remote capture

ORDER OF REALIZATION

1. To locate the rear bridge in the corresponding bearer (adaptation 15.070).
2. To unscrew pins of Torx of the fixation of a covering of the rear bridge, to discover and to fuse the oil of a case.
3. To take the end of production of the rear bridge.
4. To withdraw the plates that fix a flange of the agreement of a slit of loads of the differential one.
5. To indicate his situation.
6. To withdraw flanges of the agreement of a slit of loads (to see the rice. Details of the rear bridge), and also differential box (15.071-key).
	7. To unscrew a nut of the fixation of a flange to a wheel of gear of the main transfer (adaptation 15.040).
8. Through the artist of streaptise corresponding universal to withdraw a flange of a wheel of gear.
	9. To unscrew a nut of the fixation of loads of a wheel of gear of the main transfer (the adaptation 15.073 and a hat bent the 36 mm key).
10. To take a wheel of gear of the main transfer, the conical load and the remote capture.