FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+ 7. Transmissions
- 8. Driving axle and rear bridge
   8.1. Technical characteristic
   +8.2. Driving axle
   -8.3. Zadny Bridge
      8.3.1. Removal and installation of the rear bridge
      8.3.2. To be demolished and meeting of the rear bridge
      8.3.3. Differential Desmontagem
      8.3.4. Differential meeting
      8.3.5. Agreement of loads of wheels of gear of the main transfer
      8.3.6. Agreement of wheels of gear of the main transfer
      8.3.7. Meeting and agreement of the main transfer
      8.3.8. Substitution of a ring of fighter of a wheel of gear of the main transfer
   +8.4. Power ends
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

8.3. Zadny Bridge

8.3.1. Removal and installation of the rear bridge

GENERAL INFORMATION

Zadny Bridge

1 - remote capture,

2 - placing,

3 - flange of agreement of a slit of the main transfer

Details of the rear bridge

1 - I marry,
2 - differential loads,
3 - wheel of main gear of the main transfer,
4 - the wheel of driven gear of the main transfer,
5 - covering of a case of the rear bridge,
6 - differential box,
7 - semiaxial gear wheels,
8 - sattelita,

9 - to compose placing,
10 - nut of the load of the wheel of main gear,
11 - a flange of the wheel of main gear of connection with the rear hinge of the driving axle,
12 - nut of flange,
13 - ring fighter,
14 - I blockade of flange,
15 - bearer of the load,
16 - lavador of compensation

Differential with the union of viscous union

1 - production end,
2 - differential box,
3 - sattelita,
4 - axle,

5 - wheel of semiaxial gear,
6 - union,
7 - flange

ORDER OF REALIZATION

1. To lift the car.

2. To withdraw pillows of the fixation of a rear part of the system of leak and to move it to the part.

3. To withdraw the driving axle.

4. To withdraw ends of power of flanges of the back they launch a bridge for which of each party to unscrew six pins of "Torx" of the fixation of internal hinges to an end flange.

5. For desconectar of the bottom the left support of a ray of the back they launch a bridge to secure the access to pins of the fixation of the rear bridge to a ray.

6. To support the rear bridge through a monkey and to unscrew pins of fixation to a ray of a rear support of the triangular form of interruption.

7. To withdraw an arm of a support of the triangular form of interruption of a covering of a case of the rear bridge.

8. To unscrew hair clips of hair of the fixation of a case of the rear bridge.

9. To lower a monkey and to take the rear bridge of bass of the car.

Installation

To execute operations in the return sequence regarding the removal process. After the installation it is necessary to check the level of oil in a case of the rear bridge.