FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+ 5. Fuel system
- 6. Union
   6.1. Technical characteristic
   -6.2. Service and repair
      6.2.1. Union removal
      6.2.2. Union check
      6.2.3. Union installation
      6.2.4. Substitution of the load of needle of an end of union
      6.2.5. Substitution of a thread of union
      6.2.6. Mechanism of pedal of union
      6.2.7. Substitution of a pedal of union
      6.2.8. Removal and installation of the load of launch
      6.2.9. Agreement of releases to go round
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

6.2.9. Agreement of releases to go round

GENERAL INFORMATION

Mechanism of the automatic choice of free one to go round

1 - catraca,

2 - gear sector,

3 - union pedal

As in the moment of each inclusion and the extinguishment of the union there it is an insignificant use of bedcovers of the driven plate of pressure, the agreement of free one to go round what executes for the mechanism of the automatic choice of free one to go round installed in the superior part of a pedal it is necessary for the preservation of the capacity of normal work. This mechanism supplies the constancy of free one to go round of a pedal even in the very seedlings use for the driven pressure plate.

The agreement of free one to go round is done automatically during the pressing and an otpuskaniye of a pedal of the union.

The agreement is executed by the sector of gear, which had had been seen in an axle of pedal of union. The thread of the union concentrates on the sector of gear, which is bent around him, and in the pedal launched the thread it stretches only one spring. Holding tight a pedal of the union the catraca blockades the sector of gear, supplying the rigid communication of a pedal and the sector, and the tension of thread of union is executed.

In an union pedal otpuskaniye in an initial position the thread of the union stretches only one spring. In case of the use of bedcovers of the disc driven the spring extinguishment becomes a segment of gear in the most distant situation regarding the situation occupied before the union. For the repeated pressing of a blockade of pedal of union of a gear they segment a catraca happens to the shift a tooth more distant than supplies the compensation of the use of mistakes.

The catraca of the mechanism of the agreement of free one to go round supplies a possibility of a provorachivaniye of the sector of gear only towards a tension of a thread of the union and supplies the constant course of a pedal of the union.