FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+ 5. Fuel system
- 6. Union
   6.1. Technical characteristic
   -6.2. Service and repair
      6.2.1. Union removal
      6.2.2. Union check
      6.2.3. Union installation
      6.2.4. Substitution of the load of needle of an end of union
      6.2.5. Substitution of a thread of union
      6.2.6. Mechanism of pedal of union
      6.2.7. Substitution of a pedal of union
      6.2.8. Removal and installation of the load of launch
      6.2.9. Agreement of releases to go round
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

6.2.3. Union installation

GENERAL INFORMATION

To center of the driven pressure plate

Before the installation of a new plate of walk of the union completely to withdraw the protective lubricant.

ORDER OF REALIZATION

1. To compensate carefully for a part shlitsevy of a main end of the transmission and the internal openings of the driven disc, and also the capture of direction of the load of launch.

2. To polish a part shlitsevy of a main end of the transmission and the capture of direction of the launch that is patient with a fine uniform layer of the lubricant of special FORD n ° 5021439.

Prevention

The layer of the lubricant will be fine and uniform, otherwise during the union work the excessive lubricant is going to be rejected in the surfaces of work of the union and can break the work of union.

3. To establish the driving and discs driven in a pendulum and to center through a mandrel.

Prevention

The flat party of the disc driven with the inscription "Side of wheel of fly" or "Schwungradseite" has to go to a pendulum.

4. Constantly transversalmente to hold tight pins of the fixation of a plate of walk of the union and to hold tight finally the necessary moment.

5. To withdraw the alignment mandrel.