FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+ 5. Fuel system
- 6. Union
   6.1. Technical characteristic
   -6.2. Service and repair
      6.2.1. Union removal
      6.2.2. Union check
      6.2.3. Union installation
      6.2.4. Substitution of the load of needle of an end of union
      6.2.5. Substitution of a thread of union
      6.2.6. Mechanism of pedal of union
      6.2.7. Substitution of a pedal of union
      6.2.8. Removal and installation of the load of launch
      6.2.9. Agreement of releases to go round
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

6.2.8. Removal and installation of the load of launch

GENERAL INFORMATION

Removal of the load of launch

The noise created by the load of launch in the union extinguishment (the pedal of the union corsets itself), means what the load damages and has to be substituted.

Removal

ORDER OF REALIZATION

1. To withdraw the transmission.
2. Desconectar the launch load of down and from above of an union that puts out fork (it is specified by an arrow) and to withdraw of a main end of the transmission.
	3. To unscrew a pin of the fixation and to withdraw a fork. For the removal of a fork of the extinguishment of the union (it is specified by an arrow) to move it of a turn point.

Installation

ORDER OF REALIZATION

1. To polish surfaces of work of an end of the extinguishment of the union with the lubricant MoS2.

2. To establish a fork of the extinguishment of the union and to register a pin.

3. To install the load of launch and to fix in a fork.

4. To install the transmission.