FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+ 3. Motors
- 4. System cooling
   4.1. Technical characteristic
   +4.2. Unloading of liquid and stuffing of the system of cooling
   4.3. Removal and installation of an electric heater
   4.4. Removal and installation of the thermostat
   -4.5. Supporter
      4.5.1. Removal and installation of the supporter with the hydraulic union
      4.5.2. Removal and installation of the supporter with the electric walk
   4.6. Cooling of bomb of system
   4.7. Temperature sensor
   4.8. Driving of belt of the motor DOHC
   4.9. Mechanism of a tension of a belt of driving
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

4.5.2. Removal and installation of the supporter with the electric walk

ORDER OF REALIZATION

1. For desconectar they connect a weight of the accumulator.

2. To supply the space of additional work in the moment of the removal of a covering of the supporter to cool (what withdraws of bass of the car) to lift an advanced part of the car and to register in supports.

3. Desconectar wires of the motor and to take an electrical system of the supporter who fits in supports of triangular form.

4. Desconectar a hose of a wide tank of a supporter who fits.

5. To unscrew two pins of the fixation of a covering of the supporter to the superior part of an electric heater, soon to tilt the top of covering of an electric heater and to withdraw a covering in order that basses of the fixation to launch the supports of triangular form more. To take the supporter of bass of the car.

6. The installation is done in the sequence of the return to the removal.