FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car


Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+ 3. Motors
- 4. System cooling
   4.1. Technical characteristic
   +4.2. Unloading of liquid and stuffing of the system of cooling
   4.3. Removal and installation of an electric heater
   4.4. Removal and installation of the thermostat
   +4.5. Supporter
   4.6. Cooling of bomb of system
   4.7. Temperature sensor
   4.8. Driving of belt of the motor DOHC
   4.9. Mechanism of a tension of a belt of driving
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


4.3. Removal and installation of an electric heater
GENERAL INFORMATION

Fixing from the lowest hoses of an electric heater, element of cooling of oil of gear box and hose to a wide tank

E - fixation of the lowest hoses of an electric heater,

In – an element of cooling of oil of gear box,

With – a hose to a wide tank

ORDER OF REALIZATION
1. To fuse the liquid that cools of an electric heater. It is need not to fuse the liquid that cools of the cylinder block. In motors DOHC to remove the electric supporter of the increase in the free space of the extraction of an electric heater.
2. To withdraw hoses of an electric heater, having weakened collars of the fixation of hoses and to join hoses with a provorachivaniye.
3. In the models OHC for desconectar the hose that joins a wide tank to an electric heater.
4. In cars with the automatic exchange for desconectar elements of the cooling of oil of gear box in an electric heater (in the drawing the superior connection of an element of the cooling of oil of gear box in an electric heater is shown).
5. In cars with the condicionador for desconectar a thermoswitch of the additional supporter. If the thermoswitch is established in an electric heater, to withdraw it.
6. To withdraw the superior part of a covering of the supporter, having unscrewed two pins and having desconectado two clips and to withdraw the lowest part of a covering of the supporter who having unscrews two pins.
7. Desconectar two superior clips of the fixation of an electric heater, having proposed plastic traffic jams of traffic.
8. To lift an advanced part of the car and to unscrew two pins lower of the fixation of an electric heater (the lowest pin of the fixation if it specifies for an arrow).
9. To lightly more low an electric heater of the launch of the superior fixation, soon to withdraw an electric heater, taking it of bass of the car.
10. For the installation of an electric heater it is necessary to execute operations in the return sequence regarding the process of his removal. After the installation of oil pipelines of the system of cooling it is necessary to fill the system of the cooling of liquid and to withdraw of him the air.








QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE