FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+ 3. Motors
- 4. System cooling
   4.1. Technical characteristic
   +4.2. Unloading of liquid and stuffing of the system of cooling
   4.3. Removal and installation of an electric heater
   4.4. Removal and installation of the thermostat
   +4.5. Supporter
   4.6. Cooling of bomb of system
   4.7. Temperature sensor
   4.8. Driving of belt of the motor DOHC
   4.9. Mechanism of a tension of a belt of driving
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

4.8. Driving of belt of the motor DOHC

GENERAL INFORMATION

Etiquettes of indicative of a condition of a driving belt

E - an indicator etiquette,

In – an etiquette in the block of lever

Agreement of a belt of driving in cars models with the direction amplifier

1 - bomb of the amplifier of direction,

2 - creator,

3 - mechanism of tension of belt,

4 - water bomb,

5 - main pulley of an end of inclination,

6 - belt driving

Agreement of a belt of driving in cars models with the amplifier of direction and the condicionador

1 - bomb of the amplifier of direction,

2 - creator,

3 - mechanism of tension of belt,

4 - water bomb,

5 - compressor of condicionador,

6 - main pulley of an end of inclination,

7 - belt driving

The belt of driving of the water bomb installs in the action also the bomb of the amplifier of the direction and the compressor of the condicionador. The tension of a belt is done by the automatic tension device.

The degree of the use of a belt can determine for the provision of an etiquette (A) in a support of the triangular form of fixation regarding the block (V) in the lever of mechanism of tension (to see the rice. Etiquettes of indicative of a condition of a driving belt). If the new belt, an etiquette reassures the blush with the superior part of the block of a natyazhitel. In the belt that stretches the lever of a natyazhitel of a belt move and the block in the lever raises the relation to a mark in a support of triangular form. After the transition of a mark to the lowest part of the block of a natyazhitel the belt is subject to the substitution.

Removal and installation

ORDER OF REALIZATION

1. For the removal of a belt in order that to turn in the direction of the movement of the pointers of the clock the lever of a natyazhitel a key of face (17 mm) of the influx in the center of a pulley, to take away a belt of pulleys and to launch slowly the mechanism of tension.

2. During the installation of a belt to take the mechanism of tension of the same way, as well as in the moment of the removal, and after the installation of a belt in pulleys slowly to launch the mechanism of tension. At the same time there will be automatic belt tension.