| 1. To crush traffic jams of traffic of unloading in an electric heater. |
| 2. To fill the system of cooling through a gooey opening of a wide tank with the recommended amount of cooling the liquid. |
| 3. To join the accumulator. |
| 4. To begin the motor and to allow to him to work with the speed when of to waste time before confiding of the valve of the thermostat was accelerated. |
| 5. To put the motor out and to check the tension of connections of the system of cooling. |
| 6. After cooling of the motor to check and in case of the necessity of adding the level of cooling the liquid. |
