FORD'S SCORPIO

1985-1994 of launch

ORDER OF REALIZATION

	1. To move a seat against the stopped one behind, soon to unscrew two pins of the fixation of an advanced part of sitting down (one of pins is specified by an arrow).
2. Desconecte an auxiliary spring of bass of the seat of a driver (seating movement will weaken a spring tension ahead, but at the same time the access to him is complicated).
3. Desconectar been overcome with a heater of the session and motors of the agreement of the provision of seats.

4. To move a seat against the stopped one ahead and to unscrew three pins. These pins are closed by a hat (1 is specified by an arrow in the figure) and a covering (2 is specified by an arrow in the figure).
5. To withdraw a seat together with the mechanism of the agreement of the provision of seats and a buckle of a belt of seat.
6. The installation is done in the sequence, the return to the removal.

Removal and installation of the cushion of air of a front seat

ORDER OF REALIZATION

1. To withdraw a front seat.

2. To withdraw a covering of side of a seat. To catch the air telephone, having unscrewed two screws of the fixation.

3. To separate a few back of the base of seat, having unscrewed four pins.

4. To withdraw a few rear articles of tapestry, without having bent the ears of property and having joined it.

5. To withdraw the porous placing. To cut knots of wire of the fixation of corners of a pillow and to withdraw it together with air hoses.

6. The installation is done in the sequence, the return to the removal. At the same time it is necessary to use new rings of wire.

7. To establish interruptions of a pillow at the level with the second spring in a few back.