FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+ 12. Wheels and tires
- 13. Body
   13.1. Taken care of a body
   +13.2. Monk's hood
   +13.3. You carry
   +13.4. Extern elements of a body
   -13.5. Hall elements
      13.5.1. Removal and installation of a few articles of tapestry of a ceiling
      13.5.2. Removal and installation of an internal rear-view mirror
      13.5.3. Removal and installation of the panel
      13.5.4. Removal and installation of the central consolation
      13.5.5. Removal and installation of the superior consolation
      13.5.6. Removal and installation of the rear shelf (Model of hall)
      13.5.7. Removal and installation of advanced session
      13.5.8. Removal and installation of belts of seat of front seats
      13.5.9. Removal and installation of belts of seat of a rear seat
      13.5.10. Removal and installation of rear session
   +13.6. System of heating and ventilation
   +13.7. Condicionador
+14. Electric equipment

13.5.10. Removal and installation of rear session

PILLOW

ORDER OF REALIZATION

1. To launch far a sitting pillow ahead and to unscrew screws of the fixation of knots.
	2. To withdraw knots (firearm), having unscrewed them of a body.
3. During the installation to crush screws of the fixation of knots to the hand, to check the provision of pillows, soon to hold tight screws with the necessary moment.

BACK

ORDER OF REALIZATION

	1. To launch distant back ahead, to put back a carpet of the compartment of baggage, to unscrew and to withdraw knots (the firearm) of back.
2. To launch clips of the belts of direction and to withdraw back.
3. The installation is done in the sequence, the return to the removal.

SUBSEQUENT LATCH

ORDER OF REALIZATION

1. To launch distant back ahead.
	2. To unscrew two screws (they are specified by firearms) and to discover a latch.
3. To unscrew two screws of Togkh of the fixation of a latch. Desconectar the operational sketch of a latch and to withdraw it.
4. To take the operational sketch and the button.
5. The installation is done in the sequence, the return to the removal.