FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+ 9. Direction
- 10. Supports of the triangular form of interruption
   -10.1. Dispatch the support of the triangular form of interruption
      10.1.1. Technical characteristic
      -10.1.2. Service and repair
         10.1.2.1. Ray of an advanced support of the triangular form of interruption
         10.1.2.2. Removal and installation of a torture of an advanced support of the triangular form of interruption
         10.1.2.3. To be demolished and meeting of a torture of a support of the triangular form of interruption
         10.1.2.4. Removal and installation of the stabilizer
         10.1.2.5. Substitution of the capture metalrubber of the lever
         10.1.2.6. Removal and installation of a rotary fist
         10.1.2.7. Installation of advanced wheels
         10.1.2.8. Substitution of loads of wheel
   +10.2. Support of the triangular form of subsequent interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

10.1.2.8. Substitution of loads of wheel

GENERAL INFORMATION

Nave of a wheel advanced in a section

1 - protective hat,

2 - rotary fist,

3 - conical loads,

4 - ring fighter

ORDER OF REALIZATION

1. To withdraw a rotary fist of a wheel (10.1.2.6 to see the subsection).
2. To put the armbands (conical surfaces on the outside) in the pins of the fixation of a wheel located in a nave and to fix in a vice a rotary fist together with a nave, which is maintained for wheels nuts.
	3. There take away a protective hat (it is specified by an arrow) the axes of wheel of the interior of a rotary fist.
4. To unscrew a nut of an axle of a wheel and to take the flat placing.
5. To take the internal conical load of a rotary fist.
6. To withdraw a rotary fist of a nave of wheel.
7. 21.051 spreads a ring of fighter out through the adaptation.
8. To beat extern rings of conical loads through a nucleus from the bronze.
9. To compensate and to check the technical condition of the taken details. To substitute the worn-out or damaged details.
10. To insert through the adaptation 14,024 new extern rings of loads in a rotary fist as which emphasis serves the wooden grindstone.
11. To fill the whole space between the lubricant of solid body of loads of loads.
12. To install the extern load and to hold tight a new ring of fighter with the space were filled of the solid lubricant between the edges hunting.
13. To establish a rotary fist in a wheel nave.
14. To install the internal conical load, to insert the flat placing and there holds tight new самоконтрящуюся a nut of nave of wheel the corresponding moment (10.1.1 to see the subsection).
15. To establish a protective hat of an axle of a wheel of the interior of a rotary fist.
16. To withdraw a rotary fist of a vice and to unscrew nuts of pins of the fixation of a wheel.
17. To install a rotary fist in the car.