FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+ 9. Direction
- 10. Supports of the triangular form of interruption
   -10.1. Dispatch the support of the triangular form of interruption
      10.1.1. Technical characteristic
      -10.1.2. Service and repair
         10.1.2.1. Ray of an advanced support of the triangular form of interruption
         10.1.2.2. Removal and installation of a torture of an advanced support of the triangular form of interruption
         10.1.2.3. To be demolished and meeting of a torture of a support of the triangular form of interruption
         10.1.2.4. Removal and installation of the stabilizer
         10.1.2.5. Substitution of the capture metalrubber of the lever
         10.1.2.6. Removal and installation of a rotary fist
         10.1.2.7. Installation of advanced wheels
         10.1.2.8. Substitution of loads of wheel
   +10.2. Support of the triangular form of subsequent interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

10.1.2.2. Removal and installation of a torture of an advanced support of the triangular form of interruption

ORDER OF REALIZATION

1. To weaken nuts of the fixation of a wheel of the relevant party of the car.
2. To lift and to register an advanced part of the car and to withdraw advanced wheels.
3. Through a monkey to support the hinge of the angry lever.
4. To unscrew pins of the fixation of a torture of a support of the triangular form of interruption to a rotary fist of a wheel.
	5. In a reduction of a rotary fist in order that 14.026 to insert the device and to turn it in 90 °, weakening the lowest fixation of a torture of a support of the triangular form of interruption. The absence of the adaptation to open by force a rotary fist to screwdriver (it is specified by an arrow) or the lever.
6. To press a rotary fist, the torture of support of the triangular form of interruption will not be still launched, attention installment not to damage a hose of brake.
7. To lift a rotary fist to a body so that it did not concern hoses of brake.
	8. In a driving compartment in order that there unscrew three nuts (they are specified by firearms) the fastenings of a torture of a support of the triangular form of interruption.
9. To take in the direction I lower a torture of support of the triangular form of interruption.
10. To establish a support of the triangular form of interruption they torture at the appropriate place.
11. To check to center of a stick of the absorbent one of the shock
12. 14.026 to insert the device in a groove of a rotary fist and to turn it in 90 °.
13. To establish the lowest part of a torture in a rotary fist and 14.026 withdraws the adaptation.
14. To crush a pin of the fixation of a torture to a rotary fist of a wheel and to hold tight the corresponding moment.
15. To screw wheels, to lower the car and to hold tight nuts of wheels the corresponding moment.
16. To check a convergence of advanced wheels.