FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+ 9. Direction
- 10. Supports of the triangular form of interruption
   -10.1. Dispatch the support of the triangular form of interruption
      10.1.1. Technical characteristic
      -10.1.2. Service and repair
         10.1.2.1. Ray of an advanced support of the triangular form of interruption
         10.1.2.2. Removal and installation of a torture of an advanced support of the triangular form of interruption
         10.1.2.3. To be demolished and meeting of a torture of a support of the triangular form of interruption
         10.1.2.4. Removal and installation of the stabilizer
         10.1.2.5. Substitution of the capture metalrubber of the lever
         10.1.2.6. Removal and installation of a rotary fist
         10.1.2.7. Installation of advanced wheels
         10.1.2.8. Substitution of loads of wheel
   +10.2. Support of the triangular form of subsequent interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

10.1.2.6. Removal and installation of a rotary fist

GENERAL INFORMATION

Fixation of a rotary fist of a wheel

1 - pin of fixation of the absorbent one of the shock,

2 - the nut of the fixation of directing the sketch,

3 - nut of fixation of the stabilizer

Adaptation installation 14.026 in the moment of removal of the absorbent one of the shock of a rotary fist of a wheel

Removal

ORDER OF REALIZATION

1. To be weakened of the relevant party of a nut of an advanced wheel.

2. To be lifted and to support the car and to withdraw an advanced wheel.

3. To withdraw a support of brake without the lack of interest of hydraulic oil pipelines and to lift it to a body through a gentle wire.

4. To unscrew the screw of the fixation of a disc of brake and to withdraw a disc.

5. To take quiffs and to unscrew nuts koronchaty of spherical hinges of a rotary fist.

6. To hold tight out of a rotary fist the spherical hinge of 13.006 to direct the sketch through the adaptation.

7. To pinch had gone to spherical hinge of the angry lever of a rotary fist through an artist of streaptise.

8. To unscrew of a rotary fist that holds tight a pin of the lowest fixation of a torture of a support of the triangular form of interruption.

9. Desconectar a torture of support of the triangular form of interruption of a rotary fist through the adaptation 14.026 and to take a rotary fist.

Installation

For the installation of a rotary fist it is necessary to execute operations in the return sequence regarding the removal process.