FORD'S SCORPIO

1985-1994 of launch

Removal

ORDER OF REALIZATION

1. To weaken nuts of the fixation of a wheel of the relevant party of the car.
2. To lift and to register an advanced part of the car and to withdraw advanced wheels.
3. Through a monkey to support the hinge of the angry lever.
4. To unscrew pins of the fixation of a torture of a support of the triangular form of interruption to a rotary fist of a wheel.
5. In a reduction of a rotary fist in order that 14.026 to insert the device and to turn it in 90 °, weakening the lowest fixation of a torture of a support of the triangular form of interruption.
6. To press a rotary fist, the torture of support of the triangular form of interruption will not be still launched, attention installment not to damage a hose of brake.
7. To lift a rotary fist to a body so that it did not concern hoses of brake.
	8. In a driving compartment in order that there unscrew three nuts (they are specified by firearms) the fastenings of a torture of a support of the triangular form of interruption.
9. To take in the direction I lower a torture of support of the triangular form of interruption.

Installation

ORDER OF REALIZATION

1. To establish a support of the triangular form of interruption they torture at the appropriate place.

2. To check to center of a stick of the absorbent one of the shock about a body and to put three armbands of the superior fixation.

3. 14.026 to insert the device in a groove of a rotary fist and to turn it in 90 °.

4. To establish the lowest part of a torture in a rotary fist.

5. 14.026 withdraws the adaptation.

6. To crush a pin of the fixation of a torture to a rotary fist of a wheel and to hold tight the corresponding moment.

7. To screw wheels, to lower the car and to hold tight nuts of wheels the corresponding moment.

8. To check a convergence of advanced wheels.