Ford Skorpio +1.1. Identification of the car +2. Maintenance +3. Motors +4. System cooling +5. Fuel system +6. Union +7. Transmissions + 8. Driving axle and rear bridge - 9. Direction 9.1. Technical characteristic +9.2. Service and repair -9.3. Direction with the hydraulic auxiliary rocket 9.3.1. Technical characteristic -9.3.2. Service and repair 9.3.2.1. Removal and installation of directing the transfer 9.3.2.2. To be demolished and meeting of directing the transfer of the GEAR OF CAME 9.3.2.3. To be demolished and meeting of directing the transfer of ZF 9.3.2.4. Removal and installation of a column of direction 9.3.2.5. To be demolished and meeting of a column of direction 9.3.2.6. Removal and installation of the bomb of the amplifier of direction 9.3.2.7. To be demolished and meeting of the bomb of the hydraulic auxiliary rocket 9.3.2.8. Substitution and agreement of a tension of a belt of driving 9.3.2.9. Substitution of protective coverings of the mechanism of direction 9.3.2.10. Removal of air of system of direction with the hydraulic auxiliary rocket +10. Supports of the triangular form of interruption +11. Brakes system +12. Wheels and tires +13. Body +14. Electric equipment
|
Hydraulic bomb of the amplifier of direction
|
1 - bomb,
2 - the supply oil pipeline,
3 - oil pipeline of head of pressure,
4 - oil pipeline of secondary passage,
5 - tank,
6 - pulley,
7 - flange,
8 - load,
9 - power end,
10 - rotor,
11 - ring |
ALL THE MOTORS OF GASOLINE, EXCEPT DOHC
I set pins with hinges of fixation of the bomb of the amplifier of direction in the motor V6
ORDER OF REALIZATION |
1. To withdraw a weight they connect of the accumulator. |
2. To install the corresponding container below the hydraulic bomb. |
3. The creator closes a movie of polyethylene so that in him the liquid of the system of the amplifier of the direction did not come. |
4. To rub places around connections, soon desconectar tubes of the high pressure and the tubes of return of the bomb and a tank. |
5. In the bomb to weaken pins of the fixation of a pulley, in order that a belt and a pulley take away the side. |
6. To unscrew pins of the fixation and regulation of the bomb and to withdraw the bomb. |
|
MOTORS OF DOHC
Three pins of fixation of the available bomb after unscrewing and removal of a pulley of the bomb of the motor DOHC
The bomb is installed in a support of the triangular form of interruption in the advanced right side of the cylinder block. To improve the access to the bomb, to lift and to register an advanced part of the car in supports.
ORDER OF REALIZATION |
1. To install the corresponding container below the hydraulic bomb, to unscrew unions of the oil pipeline and to fuse the liquid. |
2. To take away a belt of driving. |
3. To unscrew three pins of the fixation of a pulley and to withdraw a pulley of the bomb. |
4. To unscrew three pins of the fixation of the bomb of an advanced part of a support of the triangular form of interruption and a pin of a rear part of a support of the triangular form of interruption and to withdraw the bomb. |
5. For the installation of the bomb to execute operations in the return sequence regarding the process of his removal. During this process there is necessary it pays the attention: – correct tension of belts of side; – installation of new placing of connections of hydraulic oil pipelines; – the correct stuffing of oil and removal of air of system of direction. |
|
CARS WITH DIESEL ENGINES
Places of connection of oil pipelines to the hydraulic bomb
|
1 - oil pipeline of head of pressure,
2 - the oil pipeline of distant seizure |
Pins of fixation of the hydraulic bomb
|
1 - pin agreement,
2 - pins fixation |
ORDER OF REALIZATION |
1. To withdraw a weight they connect of the accumulator. |
2. To lift an advanced part of the car and to register in supports. |
3. To withdraw a fender advanced below a driving compartment. |
4. To install the corresponding container below the hydraulic bomb. |
5. To weaken a collar, to withdraw the oil pipeline of distant seizure and to fuse the oil of the system. |
6. To unscrew a collar and to withdraw the pressure they head the oil pipeline. |
7. In the bomb to weaken pins of the fixation of a pulley, in order that a belt and a pulley take away the side. |
8. To unscrew the lever of agreement of the bomb. |
|
|
|