FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+ 8. Driving axle and rear bridge
- 9. Direction
   9.1. Technical characteristic
   +9.2. Service and repair
   -9.3. Direction with the hydraulic auxiliary rocket
      9.3.1. Technical characteristic
      -9.3.2. Service and repair
         9.3.2.1. Removal and installation of directing the transfer
         9.3.2.2. To be demolished and meeting of directing the transfer of the GEAR OF CAME
         9.3.2.3. To be demolished and meeting of directing the transfer of ZF
         9.3.2.4. Removal and installation of a column of direction
         9.3.2.5. To be demolished and meeting of a column of direction
         9.3.2.6. Removal and installation of the bomb of the amplifier of direction
         9.3.2.7. To be demolished and meeting of the bomb of the hydraulic auxiliary rocket
         9.3.2.8. Substitution and agreement of a tension of a belt of driving
         9.3.2.9. Substitution of protective coverings of the mechanism of direction
         9.3.2.10. Removal of air of system of direction with the hydraulic auxiliary rocket
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

9.3.2.2. To be demolished and meeting of directing the transfer of the GEAR OF CAME

Desmontagem

ORDER OF REALIZATION

1. To withdraw oil pipelines of offer and return of oil of the hydraulic amplifier. To deaden the ends of traffic jams of traffic of oil pipelines.
2. Desconectar hints with spherical hinges of directing sketches after being weakened of the countersows fixation.
3. To withdraw collars of the fixation of coverings and protector a covering of the case of transfer.
4. To move a lath of gear of an emphasis against the stop of the removal of the oil that remained in the hydraulic amplifier.
5. To move a lath of gear for the extreme situation and there insists a lath (for teeths) on a vice.
6. To withdraw armbands of the fixation of directing sketches and desconectar sketches of direction of a lath of gear.
7. To unscrew pins of covering of empurrador, to discover, they take the placing of agreement, one spring and an empurrador.
8. To unscrew the lowest cork of the case of a wheel of gear of driving of directing the transfer.
9. There unscrews a countersow of a wheel of gear of driving of directing the transfer.
10. To indicate that the provision of a wheel of gear of corresponding driving advances and also a vystupaniye of a lath of gear of two sides of the case.
11. To withdraw a covering of a wheel of gear of driving of directing the transfer and a ring of lock of the load.
12. To take a wheel of gear of driving of directing the transfer of the case together with the load.
13. To go in circles a bearer of the right that loads even in a face of end of the case the ring of lock looks.
	14. To take a ring of lock of a lath of gear.
15. To take a lath of gear, the basic capture, the load and placing.

Check of a lath of gear

ORDER OF REALIZATION

1. To check a condition of the surfaces they interact:
     – a fighter ring with the end of a wheel of gear of driving of directing the transfer;
     – teeths of a lath of gear and driving of wheel of gear, and also surface of work of an empurrador;
     – the selante of teflon of the valve that is divided of directing the transfer.

2. To check and to wash itself out hydraulically the oil pipeline and channels:
– oil pipelines and the indirect channel (secondary passage) in case of a gear lath;
– valve division.

3. To substitute the worn-out or damaged details and to polish edges of sealing rings with the lubricant of Calipsol.

Prevention

Of teflon of the union of the valve that is divided I adjust the ring before the installation it must be lowered in the boiling water so that it can be installed correctly.

The wheel of gear of driving of directing the transfer and the valve that is divided is ended with couples and they have to be substituted together.

Meeting

ORDER OF REALIZATION

1. To install the new placing of a wheel of gear of driving in the case, and also a new ring (through the adaptation 13.010). The cavity of an opening of the adaptation will be in the height of the best airplane of the case of a wheel of gear of driving.

2. There insert a nylon remote ring and a selante of a lath of gear through the capture of the corresponding diameter.

3. To polish a lath of gear with 40 grams of the gooey lubricant.

4. To install a lath of gear together with the load and the basic capture in the case.

5. To install a new ring of lock through an opening in the case. To fix his hook of the basic capture.

6. To establish a lath of gear in the middle situation and to fix it according to the designations carried out in the course of the desmontagem of transfer.

7. To register it is longitudinal the load and a ring of fighter through a lock ring.

8. To establish the covering of load was filled of the solid lubricant.

9. A countersow crushes in the lowest part of a wheel of gear of driving of directing the transfer.

10. To arrange an empurrador in case of a gear lath.

11. To screw a countersow in the lowest end of a wheel of gear of driving and to hold tight his moment 37-40 nanômetros.

12. To establish a hat.

13. To establish an emphasis of lath in a case of the mechanism of direction.

14. To hold tight a hat the moment of 37-40 nanômetros.

15. To spin a wheel of gear of driving and to measure the moment of resistance that will do 1,35 nanômetros.

16. 25 unscrews a hat in a corner °.

17. To check the moment from the resistance to a provorachivaniye of a wheel of gear of driving that will do 1,70 nanômetros and fuller an emphasis hat at three places.

18. To move a lath of gear for the extreme situation and to insist on a vice.

19. To join the thirst of direction of a lath of gear and to establish new armbands of directing sketches.

20. The protective rubber to establish a covering and to register his new collars of the fixation.

21. To be joined to the direction of hints of sketches with spherical hinges and to register them of unscrewing for countersows.