FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+ 8. Driving axle and rear bridge
- 9. Direction
   9.1. Technical characteristic
   +9.2. Service and repair
   -9.3. Direction with the hydraulic auxiliary rocket
      9.3.1. Technical characteristic
      -9.3.2. Service and repair
         9.3.2.1. Removal and installation of directing the transfer
         9.3.2.2. To be demolished and meeting of directing the transfer of the GEAR OF CAME
         9.3.2.3. To be demolished and meeting of directing the transfer of ZF
         9.3.2.4. Removal and installation of a column of direction
         9.3.2.5. To be demolished and meeting of a column of direction
         9.3.2.6. Removal and installation of the bomb of the amplifier of direction
         9.3.2.7. To be demolished and meeting of the bomb of the hydraulic auxiliary rocket
         9.3.2.8. Substitution and agreement of a tension of a belt of driving
         9.3.2.9. Substitution of protective coverings of the mechanism of direction
         9.3.2.10. Removal of air of system of direction with the hydraulic auxiliary rocket
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

9.3.2.3. To be demolished and meeting of directing the transfer of ZF

Desmontagem

ORDER OF REALIZATION

1. Desconectar oil pipelines of offer and return of oil of the hydraulic amplifier. To deaden the ends of traffic jams of traffic of oil pipelines of the protection against the pollution.

2. Desconectar hints with spherical hinges of directing sketches after being weakened of the countersows fixation.

3. To withdraw collars of the fixation of coverings and protective rubber a covering of the case of transfer.

4. To move a lath of gear of an emphasis against the stop of the removal of the oil that remained in the hydraulic amplifier.

5. To move a lath of gear for the extreme situation and there insists a lath (for teeths) on a vice.

6. To withdraw armbands of the fixation of directing sketches and desconectar sketches of direction of a lath of gear.

7. To unscrew pins of covering of empurrador, to discover, they take the placing of agreement, one spring and an empurrador.

8. To unscrew the lowest cork of the case of a wheel of gear of driving of directing the transfer.

9. There unscrews a countersow of a wheel of gear of driving of directing the transfer.

10. To indicate that the provision of a wheel of gear of corresponding driving advances and also a vystupaniye of a lath of gear of both parties of the case.

11. To withdraw a covering of a wheel of gear of driving of directing the transfer and a ring of lock of the load.

12. To take a wheel of gear of driving of directing the transfer of the case together with the load.

13. To withdraw the flat placing, a selante and the load of an end of a wheel of gear of driving.

14. To indicate the provision of a covering of a lath of gear and agreement of ring with a woodcarving about the case of a wheel of gear of driving.

15. To unscrew a ring of agreement with a woodcarving, to withdraw a covering of a lath of gear, remote placing takes the placing of round section and nylon.

16. There insists the case of a wheel of gear of driving on a vice.

17. To take a lath of gear and the remote capture.

18. To take, without having damaged a lath of gear, a ring of lock of the remote capture and taking the placing, the placing of the round section and the placing of the piston of the amplifier. To take another flat placing and a ring of lock.

19. To take the remote capture.

20. To take a selante of a lath of gear and tendentious remote placing of the remote capture.

Check of a lath of gear

ORDER OF REALIZATION

1. To check a condition of the surfaces they interact:
     – a fighter ring with the end of a wheel of gear of driving of directing the transfer;
     – teeths of a lath of gear and driving of wheel of gear, and also surface of work of an empurrador;
     – the selante of teflon of the valve that is divided of directing the transfer.

2. To check and to wash itself out hydraulically the oil pipeline and channels:
– oil pipelines and the indirect channel (secondary passage) in case of a gear lath;
– valve division.

3. To substitute the worn-out or damaged details and to polish edges of sealing rings with the lubricant of Calipsol.

Prevention

Of teflon of the union of the valve that is divided I adjust the ring before the installation it must be lowered in the boiling water so that it can be installed correctly.

The wheel of gear of driving of directing the transfer and the valve that is divided is ended with couples and they have to be substituted together.

Meeting

ORDER OF REALIZATION

1. To install a new ring of fighter in case of a wheel of gear of driving.

2. To establish a lath of gear in a vice.

3. To insert in a gear lath the remote capture with the tendentious placing and a ring of fighter.

4. To establish the placing of the piston with the new placing of the round section.

5. To put flat placing and rings of lock.

Prevention
In the course of the installation of rings of lock it is necessary to preserve a lath of gear against the damage.

6. To install the capture from nylon and the placing of the round section in case of a wheel of gear of driving.

7. To enter in 40 g of the solid lubricant between teeths of a gear lath and to move it for the case against the stop of the remote capture to the case of wheel of gear.

8. To oil a ring of agreement of a covering with a woodcarving. To establish a covering and the case of a wheel of gear of driving according to the designations carried out in the course of the desmontagem of transfer.

9. To hold tight a ring with a woodcarving through the corresponding key and to register of unscrewing for a kerneniye of the case of a wheel of gear of driving at places of cutting under a ring.

10. To insert the lowest load of a wheel of gear of driving and a ring of lock.

11. To establish a lath of gear in the middle situation and to insert a wheel of gear of driving according to the designations carried out in the course of the desmontagem of transfer.

12. To put the superior placing and a lock they touch an end of a wheel of gear of driving.

13. To hold tight a countersow of a wheel of gear of driving and to establish the covering were filled of the solid lubricant.

14. There establishes an empurrador, one spring, adjusting the placing of a slit, and also the covering polished with the briefcase that pressuriza.

15. To move a lath of gear so that his teeths were visible. To hold tight it in a vice, to fix sketches of direction and to insert new armbands.

16. The protective rubber to establish a covering and to register his new collars of the fixation.

17. To support in the direction of hints of sketches with spherical hinges and to register them of unscrewing for countersows.