Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+ 13. Body
- 14. Electric equipment
14.1. Technical characteristic
14.2. Locks of security and alternation
14.3. Unities of electronic control
14.4. System of the central blockade
14.5. System of rates of turns
14.6. Fuel computer
14.7. System of additional control
+14.8. Creator
+14.9. Author
+14:10. I bread to rub of fabric Windshield, knot of rates and lighthouse
14:11. Removal and installation of a combination of devices
14:12. Extern and internal lighting
-14:13. Another electric equipment
14.13.1. Removal and installation of switches, motors and sensors
14.13.2. System of additional control
14.13.3. Removal and installation of the radio-receiver
14.13.4. Removal and installation of loudspeakers
14.13.5. System of the alarming system that is antidragged
+14:14. Electric printers
|
I use the instrument of CRASH of removal of the radio-receiver
|
|
For the removal of the radio-receiver two instruments of CRASH (firearm) of his extraction are needed. |
| ORDER OF REALIZATION |
| 1. To join doorknobs of the management, to unscrew axial nuts with the placing and the front list of the radio-receiver. |
| 2. To push two inner ears of fixation, at the same time taking away the radio-receiver of a nest. |
| 3. To take the radio-receiver and desconectar of him an antenna wire and other captures. |
| 4. During the installation of the new radio-receiver to readjust in him the supports of the triangular form of fixation and a flange of agreement. |
| 5. To begin installation with the connection to the radio-receiver of wires and installations of the radio-receiver in a nest. The radio-receiver insists on a nest to a zashchelkivaniye of fixing ears. |
| 6. To install the front list, axial nuts with placing and doorknobs of the management. |
| 7. During the installation of the new radio-receiver to do his agreement, having adjusted in the weak station in medium waves (approximately 1.500 kilohertz or 200 m) and to make spinning the screw of agreement in both directions before receiving the best reception. In the radio-receiver installed in the factory, the agreement screw is in the advanced list. For other types of radio-receiver it is necessary to be guided by the education of maintenance of the radio-receiver. |
|
AMPLIFIER OF THE RADIO-RECEIVER
| ORDER OF REALIZATION |
| Models up to April of 1992. |
| 1. To withdraw a decorative hat of the superior part of the panel. |
| 2. Taken Desconectar, to unscrew four nuts and to withdraw the amplifier. |
| 3. The installation is done in the sequence, the return to the removal. |
| Models from April of 1992. |
|
4. Through an edge of screwdriver (it is specified by an arrow) to hook up and to withdraw a decorative hat of the superior part of the panel. |
|
5. The fastenings of the amplifier unscrew two screws (they are specified by firearms). |
|
6. To spread the amplifier out, desconectar taken and to withdraw completely the amplifier (arrow). |
| 7. The installation is done in the sequence, the return to the removal. |
|
|
|
