FORD'S SCORPIO

1985-1994 of launch

GENERAL INFORMATION

I bread to rub of fabric Windshield

1 - motor,

2 - bearer,

3 - sketches,

4 - axes of levers from clothes to rub of fabric,

5 - protect the lever from cloth to rub,

6 - it brushes

Substitution of a brush of rubber from a cloth to rub of fabric

ORDER OF REALIZATION

1. To install the lever from cloth to rub of fabric together with a brush in the vertical position.
2. To become a brush in the situation perpendicular to the lever.
	3. To hold tight an armband (1) and to move a brush of a hook I lower the lever. To move a brush to the part in the lever and to withdraw it of the lever (2 – an opening through which the brush is withdrawn of the lever).
4. Of the shut party of a brush of rubber to hold tight passatizham together both shins from steel, to take away for a side of extern clips, soon to take a brush of rubber together with shins of other clips.
5. To establish a new brush of rubber without fixing shins in one of clips from cloth to rub of fabric.
6. To enter in both shins in a brush of rubber so that the dredging in shins looked at the rubber and coincided with rubber edges.
7. To hold tight passatizham both shins from steel and rubber together and to establish them so in other clips than the edges in clips of two sides entered in flutes of lock of a brush of rubber.
8. To install a brush from cloth to rub of fabric in the lever and to lower in the glass.
9. Density checks the brush prileganiye to the glass.

Removal and installation of the lever from a cloth to rub of fabric

ORDER OF REALIZATION

1. To open a monk's hood.
	2. To withdraw a plastic hat of a nut of the fixation of the lever and to unscrew a nut.
	3. To observe the position of levers and to withdraw the lever from cloth to rub of fabric of an axle.

Removal and installation from a cloth to rub of fabric of a windshield

ORDER OF REALIZATION

1. To withdraw levers of brushes from a cloth to rub of fabric.
2. To withdraw a broiler of ventilation.
3. Desconectar the capture of electric wires of the motor.
	4. To unscrew 8 pins of "Torx" of the fixation of the motor and the mechanism from a cloth to rub from fabric to a splitting of a driving compartment (1 – two screws are located in front of the cloth motor to rub of fabric, 2 – three screws on the right lever, 3 – two screws on the left lever, a pin is located between cloth levers to rub of fabric).
	5. To take the mechanism from a cloth to rub of fabric and the motor (the firearms specified points of the fixation of the motor from a cloth to rub of fabric).
6. Desconectar sketches of axes of levers and the mechanism krivoshipny.
Prevention The sketches of the mechanism are joined to his cranks through spherical nylon fingers. The fingers must be taken carefully through the lever, and insert after a lubricant from graphite of covering.
7. To unscrew a pin of the fixation and to withdraw a crank.
8. To unscrew three screws and to withdraw the motor of an arm.
9. For the installation from a cloth to rub of fabric it is necessary to execute operations in the return sequence regarding the removal process.