FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+ 12. Wheels and tires
- 13. Body
   13.1. Taken care of a body
   +13.2. Monk's hood
   -13.3. You carry
      13.3.1. Removal and installation of doors
      13.3.2. Agreement of provision of a door
      13.3.3. Removal and installation of the list of a few internal articles of tapestry of doors
      13.3.4. Removal and installation of extern doorknobs of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a selante of a door
      13.3.8. Removal and installation of metal adornments of a door
      13.3.9. Removal and installation of the mechanism of a regulator of window
      13.3.10. Removal and installation of decorative bedcovers of side of doors
      13.3.11. Removal and installation of decorative bedcovers of a frame of metal adornments of a door
      13.3.12. Removal and installation of extern rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a haulage company of baggage
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation of an emphasis filled out with gas of a door of a haulage company of baggage
      13.3.17. Removal, installation and agreement of a lid of trunk (Model of hall)
      13.3.18. Removal and installation of the lock of a lid of trunk (Model of hall)
   +13.4. Extern elements of a body
   +13.5. Hall elements
   +13.6. System of heating and ventilation
   +13.7. Condicionador
+14. Electric equipment


bfe6b27a


13.3.6. Removal and installation of the lock of a door

ORDER OF REALIZATION
1. To withdraw the list of a few internal articles of tapestry of doors.
2. To withdraw a covering of rubber for the foam around the door lock. Desconectar the sketch of the management of the extern doorknob.
3. Desconectar to electric capture of the electric motor of the lock of a door. For the removal of the motor to unscrew two screws and to turn the motor of the launch of the sketch of the management.
4. To unscrew the screw of the fixation of the internal doorknob of a door, to move the doorknob behind, to withdraw sketches of the doorknob. Desconectar of the doorknob of the sketch and to take the captures of direction of sketches of a door.
5. There unscrew the screw (it is specified by an arrow) the fastenings of the internal doorknob of a door, to move the doorknob behind, to withdraw sketches of the doorknob. Desconectar of the doorknob of the sketch and to take the captures of direction of sketches of a door.
6. In the presence of switches of the lock of a door for desconectar of them the capture.
7. The fixation of the lock unscrews three screws (they are specified by an arrow). To take the lock of door for a great opening in the internal list of a door.
8. The installation is done in the sequence, the return to the removal.
9. During the installation to polish sketches of the internal doorknob at places where they pass by plastic captures.
10. During the installation of internal doorknobs the rychazhok will be in the family I walk "openly".
11. To check the operation of the lock of a door before the installation of a few articles of tapestry of a door at the place.