FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+ 12. Wheels and tires
- 13. Body
   13.1. Taken care of a body
   +13.2. Monk's hood
   -13.3. You carry
      13.3.1. Removal and installation of doors
      13.3.2. Agreement of provision of a door
      13.3.3. Removal and installation of the list of a few internal articles of tapestry of doors
      13.3.4. Removal and installation of extern doorknobs of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a selante of a door
      13.3.8. Removal and installation of metal adornments of a door
      13.3.9. Removal and installation of the mechanism of a regulator of window
      13.3.10. Removal and installation of decorative bedcovers of side of doors
      13.3.11. Removal and installation of decorative bedcovers of a frame of metal adornments of a door
      13.3.12. Removal and installation of extern rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a haulage company of baggage
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation of an emphasis filled out with gas of a door of a haulage company of baggage
      13.3.17. Removal, installation and agreement of a lid of trunk (Model of hall)
      13.3.18. Removal and installation of the lock of a lid of trunk (Model of hall)
   +13.4. Extern elements of a body
   +13.5. Hall elements
   +13.6. System of heating and ventilation
   +13.7. Condicionador
+14. Electric equipment


bfe6b27a


13.3.17. Removal, installation and agreement of a lid of trunk (Model of hall)

ORDER OF REALIZATION
1. To open a lid of trunk and, using a marker, to drive around a knot they go in an internal surface of a covering.
2. To discover with internal surfaces the decorative list.
3. To withdraw taken of the lock and the alarming switch.
4. Desconectar a braid of wires of clips and to tie a rope of the corresponding length to each capture. To take a braid of wires of a covering, soon to untie a rope and to leave it in a trunk lid.
5. The knots fastenings to unscrew four pins (they are specified by firearms) and to discover.
6. Establish a covering, having combined knots with marks before done, and hold tight pins of knots. To tie a rope to a wires braid and for a rope to implicate wires in a trunk lid.
7. Captures adhere to the lock and the alarming switch.
8. To install the decorative list and to fix it through clips.
9. To close a lid of trunk and to check that the slit in the perimeter of a covering was identic. If necessary it is possible to correct slits, having launched pins of knots and having moved a covering.
10. To hold tight pins.