FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+ 12. Wheels and tires
- 13. Body
   13.1. Taken care of a body
   +13.2. Monk's hood
   +13.3. You carry
   -13.4. Extern elements of a body
      13.4.1. Removal and installation of the cylinder of the lock of a mouth of the gulf of fuel
      13.4.2. Removal and installation of a covering of the hatch
      13.4.3. Removal and installation of a windshield and motionless metal adornments
      13.4.4. Removal and installation of decorative bedcovers of a windshield
      13.4.5. Removal and installation of decorative bedcovers from glass of a back door
      13.4.6. Removal and installation of emblems
      13.4.7. Front agreement of height of installation of bumpers
      13.4.8. Removal and installation of bumpers
      13.4.9. Removal and installation of bedcovers of bumpers
      13.4.10. Removal and installation of an advanced plunderer
   +13.5. Hall elements
   +13.6. System of heating and ventilation
   +13.7. Condicionador
+14. Electric equipment

13.4.8. Removal and installation of bumpers

ORDER OF REALIZATION

1. To lift respectively an advanced part or rear part of the car and to register in supports.
Bumpers front line player
	2. Desconectar the side shears (firearm), having turned them in 90 °. To launch an angry emphasis, having pulled them of bumpers.
3. Togkh-key completely to unscrew pins of lock, soon 24 mm a replaceable head to unscrew pins of agreement.
4. To pull bumpers they dispatch of the car and to withdraw it.
5. The installation is done in the sequence, the return to the removal. It is compulsory to adjust the height of the installation of bumpers.
Bumpers bottom
6. Desconectar side clips, having turned them in 90 °.
7. To unscrew two screws of Togkh that fix bumpers bottom to support.
8. Desconectar wires of the lighting of the plate of register and to take them of bumpers.
9. To move bumpers of the car and to withdraw it.
10. The installation is done in the sequence, the return to the removal.
11. To adjust basic supports of triangular form so that the distance between bumpers and the superior surface of a support of triangular form equaled 111 mm.
12. To lower the car.