FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+ 9. Direction
- 10. Supports of the triangular form of interruption
   +10.1. Dispatch the support of the triangular form of interruption
   -10.2. Support of the triangular form of subsequent interruption
      10.2.1. Technical characteristic
      -10.2.2. Service and repair
         10.2.2.1. Substitution of the absorbent one of the shock
         10.2.2.2. Spring substitution of a support of the triangular form of interruption
         10.2.2.3. Removal and installation of the lever of a support of the triangular form of interruption
         10.2.2.4. Substitution of the capture metalrubber of a ray of a rear axle
         10.2.2.5. Removal and installation of the stabilizer
         10.2.2.6. Substitution of loads of wheel
         10.2.2.7. System of agreement of a glimpse of way (eviction)
         10.2.2.8. Removal and installation of the compressor
         10.2.2.9. Substitution of the sensor of height
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

10.2.2.7. System of agreement of a glimpse of way (eviction)

GENERAL INFORMATION

Elements of system of agreement of a glimpse of way

1 - compressor,
2 - moisture separator,
3 - taken,
4 - valve eletromagnética of pressure unloading,

5 - height sensor,
6 - coulisse,
7 - absorbent of the special shock,
8 - block of locks of security,
9 - compressor alternation

Elements of fixation of a tube

Height sensor

Absorbent of the special shock

The system supports the height of a rear part of the car at a level independent of the load of the car.

The system of the agreement of a glimpse of way is composed of the sensor of the height, the compressor, two special absorbent of the shock, the alternation of the compressor and tubes they join. The compressor does the extraction through air bomb in absorbent from the shock in signs of sensor of height. The modification of the height of the provision of a body defines inside 20 seconds that then the corresponding order happens. The connection of the compressor is done during the period of not more than 5 minutes. The repair of separate elements of the system is not supplied.