FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car


Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+ 12. Wheels and tires
- 13. Body
   13.1. Taken care of a body
   +13.2. Monk's hood
   +13.3. You carry
   +13.4. Extern elements of a body
   +13.5. Hall elements
   +13.6. System of heating and ventilation
   -13.7. Condicionador
      13.7.1. Service of the air condicionador
      13.7.2. Driving of belt of compressor
      13.7.3. Condenser supporter
      13.7.4. Thermostat
      13.7.5. Water valve of a heater
+14. Electric equipment


bfe6b27a


13.7.1. Service of the air condicionador
GENERAL INFORMATION

Agreement of system of the air condicionador
1 - thermostat,
2 - evaporador,
3 - wide valve,
4 - compressor,
5 - compressor pulley,
6 - pressure sensor,
7 - glass observation,
8 - moisture separator,
9 - supporter,
10 - condenser

Pins of the regulator of position of the air compressor of the condicionador

 The pins are specified by firearms.

The state and the tension of a belt of compressor of driving of the condicionador happen regularly.

Each one to front guard retires 20.000 km and leaves and the insects are cleaned of condenser plates.

For the maintenance of the tension of the consolidation of the system in good form to begin the air condicionador, at least during 10 minutes monthly, even in the cold time.

The air condicionador because of the work provided that the holes could lose up to 100 g of the refrigerant liquid inside a year, therefore, is necessary to refuel the system periodicamente.

It is possible independently to do the substitution alone of those elements during the work to which it will not have depressurization of the system.