FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+8. Driving axle and rear bridge
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+ 12. Wheels and tires
- 13. Body
   13.1. Taken care of a body
   +13.2. Monk's hood
   +13.3. You carry
   +13.4. Extern elements of a body
   +13.5. Hall elements
   -13.6. System of heating and ventilation
      13.6.1. Removal and installation of the unity of control of a heater
      13.6.2. Removal and installation of threads of management of a heater
      13.6.3. Removal and installation of a heater
      13.6.4. To be demolished and meeting of a heater
      13.6.5. Removal and installation of air tubes of a heater
   +13.7. Condicionador
+14. Electric equipment

13.6.3. Removal and installation of a heater

THE CARS MANUFACTURED TO 04,1992 YEARS

ORDER OF REALIZATION

1. To withdraw a weight they connect of the accumulator.

Prevention

At the same time the information in electronic memory devices goes out of the memory.

2. To take away the pressure in the cooling system, having unscrewed a covering of a wide tank.

3. To hold tight tubes of branch of a provision of cooling the liquid to a heater.

4. For desconectar of branch tubes in a splitting two hoses acalentadoras, at the same time cooling the liquid that has to be joined in a ship will follow of a heater.

5. To fuse the very quantity of cooling the liquid of an electric heater of heater, taking it.

6. To withdraw a plate of tubes of branch of an electric heater and putting of a splitting of a driving compartment.

7. To withdraw the central consolation and a covering to secure the access to a thread of the management of a heater.

8. To withdraw a combination of devices of the panel.

9. To withdraw the superior part of the panel.

10. Desconectar an air tube of the case of heater.

11. To unscrew two nuts of the fixation of the block of a heater. To implicate the block in the car until the branch tubes do not leave a splitting of a driving compartment, soon to move the block to the part.

12. The installation is done in the sequence, the return to the removal.

13. To add the liquid in the cooling system.

THE CARS WHEN 04.1992 MANUFACTURED FROM THAT TIME

ORDER OF REALIZATION

1. To withdraw a weight they connect of the accumulator.
Prevention At the same time the information in electronic memory devices goes out of the memory.
2. To fuse the liquid that cools of the cooling system.
3. To weaken clips and desconectar the offer and repayable hoses of an electric heater.
4. To unscrew two screws of the fixation of a protective plate of an electric heater and to withdraw the placing of a splitting of a driving compartment.
5. To withdraw the panel.
6. Desconectar a braid of wires of the panel of the access to latches of mouths of a degelador of metal adornments.
	7. To unscrew the screw with a nut and desconectar each mouth of the degelador of a windshield of a heater (the firearms specified fastenings of mouths). To unscrew two nuts and desconectar the central mouth of a heater at the eyes level.
8. To unscrew two nuts and soon desconectar the right mouth at the level of eyes of a heater. To repeat similar actions of the left mouth.
	9. For a lack of interest of rear mouths of the heating of legs of a heater to withdraw an axle (it is specified by an arrow) of the support of triangular form maintaining a mouth that at the same time supports an extern part of a support of triangular form behind.
Prevention If it does not support a support of triangular form behind, it will fall in a mouth after the extraction of an axle. This soon to acquire it, will have to withdraw the channel of ventilation for what is necessary to withdraw halls of the session and to lift a carpet.
10. Desconectar the capture of the unity of control of a heater.
11. To unscrew two nuts of the fixation of a heater to a splitting of a driving compartment and to withdraw carefully a heater.
12. The installation is done in the sequence, the return to the removal.
13. To add the liquid in the cooling system.