FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car



Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+ 8. Driving axle and rear bridge
- 9. Direction
   9.1. Technical characteristic
   -9.2. Service and repair
      9.2.1. Removal and installation of directing the transfer
      9.2.2. To be demolished and meeting of directing the transfer
      9.2.3. Removal and installation of a steering-wheel
      9.2.4. To center of a steering-wheel
      9.2.5. Removal and installation of the lock of blockade of a column of direction
      9.2.6. Removal and installation of a column of direction
      9.2.7. To be demolished and meeting of an end of direction
   +9.3. Direction with the hydraulic auxiliary rocket
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment


bfe6b27a


9.2.4. To center of a steering-wheel

GENERAL INFORMATION

This action of correction of small mistakes (to 60 °) in centering of a steering-wheel. For the elimination of great mistakes of withdrawing a steering-wheel and modifying the provision of a steering-wheel during his installation.

ORDER OF REALIZATION
1. To establish wheels of the movement straightly ahead and to observe a corner in which it is necessary to modify the installation of a steering-wheel.
2. To lift an advanced part of the car.
3. To weaken countersows of both sketches of direction. Also to weaken collars of the fixation of protective coverings.
4. To put etiquettes of combination between the end of each sketch of direction and a tip.
5. To turn both sketches of direction in a direction in the same corner to modify the provision of a steering-wheel. The turn of the sketch in a corner 19 ° leads to the updating of the provision of a steering-wheel in 1 °.