FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+7. Transmissions
+ 8. Driving axle and rear bridge
- 9. Direction
   9.1. Technical characteristic
   -9.2. Service and repair
      9.2.1. Removal and installation of directing the transfer
      9.2.2. To be demolished and meeting of directing the transfer
      9.2.3. Removal and installation of a steering-wheel
      9.2.4. To center of a steering-wheel
      9.2.5. Removal and installation of the lock of blockade of a column of direction
      9.2.6. Removal and installation of a column of direction
      9.2.7. To be demolished and meeting of an end of direction
   +9.3. Direction with the hydraulic auxiliary rocket
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

9.2.2. To be demolished and meeting of directing the transfer

GENERAL INFORMATION

Transfer direction

Desmontagem

ORDER OF REALIZATION

1. Desconectar hints with spherical hinges of directing sketches after being weakened of the countersows fixation.

2. To withdraw collars of the fixation of coverings and to withdraw protective cases of directing the transfer of a covering.

3. To move a lath of gear on the left against the stop and to insist on a vice with gentle sponges.

4. The corresponding key to unscrew sketches of direction of a lath of gear.

5. To withdraw an emphasis of lath they finish off mandrel 13.009 of agreement, to take one spring and an emphasis of a lath.

6. To discover a wheel of gear of driving of directing the transfer together with his placing.

7. To withdraw the load of an end of a wheel of gear of driving of directing the transfer.

8. To take a lath of gear of the case of transfer.

9. To take the ring of direction from nylon in the right side of the case of directing the transfer.

Meeting

ORDER OF REALIZATION

1. To compensate and to check the technical condition of all the details; to substitute the worn-out or damaged details.

2. To insert in the case the ring of direction from nylon in the right side of the case of directing the transfer.

3. To annex a lath of gear to the case of directing the transfer and establishing a lath in the middle situation.

4. To install a wheel of gear of driving in case of the direction of transfer together with the load.

5. To install an emphasis and one spring in case of the direction of transfer.

6. To establish a protective hat of an emphasis of a lath in the selante, to hold tight his moment 40-50 nanômetros, and soon to unscrew it in a corner 65 °.

7. Through a dynamometer to check the moment of resistance during the turn of a wheel of gear of driving to direct the transfer.

8. To move a lath of gear for the case against the stopped one on the left and to insist on a vice with gentle sponges.

9. To join the thirst of direction of a lath of gear and to put protective cases of the transfer of a covering.

10. To establish new collars of the fixation of coverings.

11. To be joined to the direction of hints of sketches with spherical hinges and to register them of unscrewing.