FORD'S SCORPIO

1985-1994 of launch

Repair and operation of the car

Ford Skorpio
+1.1. Identification of the car
+2. Maintenance
+3. Motors
+4. System cooling
+5. Fuel system
+6. Union
+ 7. Transmissions
- 8. Driving axle and rear bridge
   8.1. Technical characteristic
   -8.2. Driving axle
      8.2.1. Removal and installation
      8.2.2. Repair of the intermediary load
   +8.3. Zadny Bridge
   +8.4. Power ends
+9. Direction
+10. Supports of the triangular form of interruption
+11. Brakes system
+12. Wheels and tires
+13. Body
+14. Electric equipment

8.2.2. Repair of the intermediary load

GENERAL INFORMATION

Provision of an etiquette of a U-shaped adjusts of plate

1 - hinge of cardan,

2 - plate agreement

Desmontagem

ORDER OF REALIZATION

1. To withdraw the driving axle.

2. To open by force the placing of security and to unscrew a pin of the flexible fixation of forks of the transversalmente. To withdraw to the part an agreement plates of U-shaped, having indicated in the beginning his situation.

3. Desconectar forks of the transversalmente hinge and to withdraw of an end the covering of protection together with the case of the intermediary load.

4. Through an artist of streaptise - humeral universal to withdraw of an end the load together with a covering and a ring of fighter.

Meeting

ORDER OF REALIZATION

1. To fill the space between the load and the protection they cover of the universal lubricant.

2. To install the load together with a covering in an end through the capture of the corresponding diameter (the red party of the load has to direct to forks of near to transversalmente the hinge to itself).

3. To put the case with the protection they cover the load installed in an end.

4. To insert forks of the transversalmente hinge.

5. To crush a pin of the fixation of forks together with the protection of placing of what it unscrews in an advanced end and to hold tight it so that it was possible to insert an agreement plates of U-shaped.

6. To join both parts of the driving axle, establishing forks of depende of both of his ends in an airplane. The non-execution of this condition does not supply the balance of an end and causes the strong vibration.

7. To establish a plate U-shaped, to hold tight a pin that joins the necessary moment and to register it of unscrewing, having bent the placing of security.

8. To install the driving axle.